Diagnosing Issues

This issue could be caused by problems with the ESC, or by problems with the Motor.

• Purchase link for replacement motors
• Purchase link for replacement ESCs
• Instructions: How to change the Motor
• Instructions: How to change the ESC

Instructions: Perform the test

See video instructions of how to perform the steps below in the guide for "one motor is not spinning right"

Always turn off the board first, before performing tests.

1. Remove the truck
   • unscrew the nut
   • take off the bushing
2. Switch the cables
   • remove the ESC Case
   • unplug the cables
   • switch them around and plug them back in
3. Set the truck back and start the motors
   • set the truck back in place
   • secure it 
   • start the motors

Case #1 Both wheels are now spinning

The cable connection was loose

• connect the right cables again and make sure the cables are connected properly
• If you are unable to connect the cables properly for both wheels to work, replace both motors

Case #2 The wheels still do not spin

Both, the Motors, and the ESC need to be replaced

• If you are under warranty, contact us for a replacement
• if your warranty expires,
  • here you can find a replacement ESC.
  • here you find replacement motors
  • You can use this code at checkout for 20% off: Accessories-20